[jayasreelakshmi]

can anyone please upload the post processor file for fanuc robocut alpha 1ia wire cut mastercam ver8.0 (not x8)

[Superman]

If you still have the install disks.
Mastercam included generic, basic posts with those packages, for customising to your machine.
V8 is about 30 years old. You might find it on an old thread.
You would need possibly 3 files, the post, the txt file, and maybe a power
file.

I don't like your chances.

[jayasreelakshmi]

Thank you Superman, I bought this machine with the computer around 2 months back, slowly setting it up to run. Thank you for your reply.