Hey guys,
we have an issue with this machine. When starting up the machine it passes ram tests on bios screen, everything is OK and then when HURCO logo appears it crashes and starts all over again.
Hey guys,
we have an issue with this machine. When starting up the machine it passes ram tests on bios screen, everything is OK and then when HURCO logo appears it crashes and starts all over again.
The board is behaving strangely. I installed Windows XP, everything works, it boots, but when I install an SSD with WINMAX, it constantly reboots.
Check the jumper settings on the Canbus Controller. Ask Hurco for the correct settings.
Good day. The equipment worked until Friday evening, turned off and on Monday they could not turn on the boot sector error,
replaced the battery in the BIOS. It boots up to the HURCO picture on a black background and again reboots.
And so on in a circle.