Hey all, here's a build thread I really still have to update from the past 5 years so I've really left this control build in the dark for a long time. I'm going to be building both versions of the Series 0 Model C.. the 0M and the 0T under the FANUC order number A02B-0091-B501 and -B502.
Thankfully I have the manuals in PDF! Yay! Thanks to everyone that has provided me manuals.
Somehow I ended up with a FANUC A02B-0098 type CRT/MDI, but I have both the full keyboard FS0C Operator Panel and the small keyboard model, FANUC A02B-0091-C141 and C161. I guess they call the 0098 a "Hi-Fi" type and I'm not really sure what that is.
I've sorta waited on this one because it's gonna be the most challenging, as well as finishing the other builds I have going on. I've really looked high and low on eBay to get the right parts to get this build started at the right prices.
As I've stated in.. another CNC forum.. I've got a FANUC 0P that replaced a 6M with the ubiquitous Punch software but that's not the purpose of this thread. I did not have much involvement with the installation of this CNC, other than selecting the boards used. The control was delivered as is and then set up with the help of Amada USA. Pic is attached of the control, and the press with the original control Amada FANUC P (6M). We located a full keyboard FS0C Operator panel, and changed it with turret press keysheet membrane. Amada supplied ladder prints and it was done. Amada was great help to me.
I really have to learn more about the PMC-M too while I do this build. I bought the A16B-1211-0901 PMC-M board.
I also bought the A16B-1210-0110 power supply from eBay.
I also am going to be using the A20B-2001-0060 Masterboard.
Can anyone here help me with doing my Series 0 Model C ladder? I can ship the cassettes pretty much anywhere because they are small and light.
More details to follow...