Hi -

Looking for some quick feedback / info on how often its needed to lube a ball screw given the use conditions below:

- Purchase the kit https://www.arizonacnckits.com/pm-25-cnc-kit.html and install
- Use the mill about 2h per week on average.
- Nothing crazy, Alum and plastic. Low to med loads.

How often would I need to oil (grease ?) the ball screw nut via the port/fitting?

I did a search, but some threads are over a yr old.
https://www.cnczone.com/forums/taig-...0-cnc-cad.html

thanks in advance.

AG
(PS if there are any other maintenance tips on the ball screw, feel free to share a link)