New product release pdf.
NOTE:The attached "SIMILAR THREADS" are automatically inserted and do not necessarily have my endorsement.
Al.
Thread: Backlash free R&P
Results 1 to 3 of 3
-
03-07-2014, 04:14 PM #1
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24223
Backlash free R&P
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
-
03-07-2014, 06:13 PM #2
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
$750 for a new pinion !!!!!
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
03-07-2014, 06:28 PM #3
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
OK, I just bought two pinions, and will make an attempt at fabricating my own rack.
Wish me luck.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Reply With QuoteSimilar Threads
-
Backlash free rotary table
By Zoidberg in forum Linear and Rotary MotionReplies: 1026Last Post: 03-16-2022, 09:48 PM -
Spiral anti-backlash couplers introducing backlash!
By MArruda in forum DIY CNC Router Table MachinesReplies: 22Last Post: 06-07-2011, 08:31 AM -
Backlash or motor tuning problem? How do I test for backlash?
By Brian Queen in forum Mach MillReplies: 8Last Post: 03-10-2008, 09:35 PM -
Servo idea - elimated backlash - zero backlash !
By synthetiklone in forum Linear and Rotary MotionReplies: 6Last Post: 12-06-2006, 08:35 PM
Tags for this Thread
Posting Permissions
