I have a BP 12 inch rotary table that I would like to use as a 4th axis on my BP mill. where can I get information on how to convert it using a stepper.
I have a BP 12 inch rotary table that I would like to use as a 4th axis on my BP mill. where can I get information on how to convert it using a stepper.
this post should be in the kneemill section just up of the benchtop section.: http://www.cnczone.com/forums/forumdisplay.php?f=157
The opinions expressed in this post are my own. -Les opinions exprimé dans ce messages sont les mienne