I'm building a rail gun kinda, sorta, similar to the one below. The barrel is .920 in diameter. My question is how big should I make the whole in the clamp? .921?
Thanks for any guidance!
http://accurateshooter.net/Blog/xbr01.jpg
Thread: How big a hole do I need?
Results 1 to 12 of 12
Threaded View
-
09-24-2011, 08:44 PM #1
Registered
- Join Date
- Dec 2006
- Posts
- 21
How big a hole do I need?
Reply With QuoteSimilar Threads
-
how to rapid in a hole then peck drill coming out of the hole to clear
By bilbo2 in forum FanucReplies: 18Last Post: 03-21-2011, 11:28 PM -
0 to a**hole
By ksystems in forum Community Club HouseReplies: 18Last Post: 11-27-2009, 05:53 PM -
NEWBIE HELP>> How do you input a drill hole or extrude a hole that is..
By l u k e in forum SolidworksReplies: 9Last Post: 02-11-2008, 05:54 PM -
How to tap a hole?
By alexccmeister in forum Uncategorised MetalWorking MachinesReplies: 5Last Post: 05-28-2007, 10:25 AM -
How best to cut a hole in CNC.
By cameraman32 in forum Benchtop MachinesReplies: 6Last Post: 03-23-2007, 06:07 AM
Posting Permissions
