After I got my G0704 a couple weeks ago, figured I would add DRO's until I get the CNC setup. Cut some 2" (1/8" thick) steel I had and welded a bracket and mounted to two screws that are on the headstock, wanted to give others idea's where to mount:
When I first got the machine, I played around for about an hour cutting some scrap aluminum I had, then threw an 80% lower in a jig and proceeded to cutting. A couple things I'm going to buy since is a roughing end mill to get that material out quicker, but overall turned out great:
thanks to everyone on this forum, spent a month reading before I purchased the Grizzly, and still reading for other idea's and the CNC conversion