[Tolesh]

Hi all... Does anyone know how to make a backup of the parameters. My lathe is connected by RS232 to a laptop. can i transfer the parameters to the laptop an create a backup file..?? if anyone know how to do it, please help me..

Thanks in advance
Regards

Felipe
Cancun Mexico

[memoryman]

g to www.memex.ca .Look for links :Fanuc 0-15-16-18-21 Backup Manual

[Al_The_Man]

You can download a transfer program from Cadem site (Cadem Lite).
I have the Fanuc bulletin on the 0 if you send me a email by PM.
Al.

[Tolesh]

Adding Picture of the Alarm 1.-0P alarm

Hi all... Does anyone know how to make a backup of the parameters. My lathe is connected by RS232 to a laptop. can i transfer the parameters to the laptop an create a backup file..?? if anyone know how to do it, please help me..

Thanks in advance
Regards

Felipe
Cancun Mexico

[memoryman]

it says :"Motor overheat" on the drive.

[Tolesh]

Memoryman...

Thanks for your answer, i know is over heat, but how can i fix it, is any micro swicht or what i need change to solve this problem.

regards

Felipe

[memoryman]

there is a thermal switch in the motor. Either that switch is defective, the motor is overheating or the wiring is defective.

[Tolesh]

i cant fix the problem. when open in the morning the workshop and turn on the CNC lathe Miyano, allways turn the red light MACHINE ALARM, then i need push the reset button on the back of the lathe, and the alarm goes off, the machine work great all the day, but im not fill ok because the alarm, does anybody know where in the machine do i need to find the problem to try to fix it. sorry about my english.
regards
Tolesh