Can somebody please tell me what the adjustment numbers represent. Are they "x" amount = 0.10", or what? And does it apply globally, or just for the one work offset.
Thanks.
Thread: Taper compensation SL30 Lathe
Results 1 to 2 of 2
Threaded View
-
03-06-2014, 04:29 PM #1
Registered
- Join Date
- Feb 2012
- Posts
- 12
Taper compensation SL30 Lathe
Reply With QuoteSimilar Threads
-
Taper on CNC Lathe
By mflux_gamblej in forum Uncategorised MetalWorking MachinesReplies: 18Last Post: 04-18-2013, 11:33 PM -
Tool nose compensation using G71 on lathe
By jgarner77 in forum G-Code ProgramingReplies: 7Last Post: 09-01-2012, 09:25 AM -
Fanuc lathe cutter compensation
By 60rock in forum FanucReplies: 18Last Post: 03-13-2012, 02:42 AM -
Radius compensation in lathe cycles
By Zudo in forum FanucReplies: 6Last Post: 06-09-2010, 02:10 PM -
Taper offset compensation
By elaganis in forum Haas LathesReplies: 4Last Post: 06-10-2008, 05:46 AM
Tags for this Thread
Posting Permissions
