I'm looking for info on my 1992 enshu hmc40 mill. i need the variables 500-533 to make the macros work correctly on the tool setter/breakage sensor. Any info would be greatly appreciated.
I'm looking for info on my 1992 enshu hmc40 mill. i need the variables 500-533 to make the macros work correctly on the tool setter/breakage sensor. Any info would be greatly appreciated.
it would be nice if you had a hard copy of them.
If this is a renishaw they may be able to help you out (if someone there can remember where to find such old documentaion).
regardless of who's system this is you have to be carefull
some (at least 3 of them) of the variables you speack of will be X Y Z locations for the setter from machine home
Good luck
Found a Hard copy from manufacture. Thanks all.