Since another DIY machine was just posted here, I thought I'd add one that I just finished (almost).
It's a 13" jointer with a Byrd Shelix cutterhead.
More info on my website: Home Built 13" Jointer
Since another DIY machine was just posted here, I thought I'd add one that I just finished (almost).
It's a 13" jointer with a Byrd Shelix cutterhead.
More info on my website: Home Built 13" Jointer
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
That's so nice! Makes my jet 6" jointer tiny.
Yeah, the short piece of walnut was borderline, and I'll probably never run a board that short across it again. I need to make some good push blocks when I build the fence and guard.Edit: I just watched the video - please use push blocks on those small boards. Hate to see what happens if you slip on that monster of a jointer.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
I sold a 6" Jet, and yes, this is a LOT bigger.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
That's an aircraft carrier!!! Very nice, Gerry.
Edit: I just watched the video - please use push blocks on those small boards. Hate to see what happens if you slip on that monster of a jointer. Very smooth running jointer!
David
Romans 3:23
Etsy shop opened 12/1/17 - CurlyWoodShop
Wow.
Those cutting heads are awesome I like it a lot ,did the back of my ring ringer in a slip on the 6 inch I have 3/4 of the way through the tendon lucky me .That build description is great thank's.
Wow, fantastic job!
It looks awesome, almost like you fitted in/out feed tables to K9! (Dr Who reference).
cheers, Ian
It's rumoured that everytime someone buys a TB6560 based board, an engineer cries!