If putting any money into a filter, I would personally use a 3 phase inductor on the output side of the VFD, these protect the VFD and the motor.naspc: Does the EMC/EMI filter go before the VFD or after the VFD on the cable that goes to the Spindle.
Anyone using EMC/EMI filters can recommend one?
Al.
Thread: VFD protection filter etc.
Results 1 to 20 of 75
Threaded View
-
09-09-2016, 08:02 PM #1
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24220
VFD protection filter etc.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Reply With QuoteSimilar Threads
-
Eye Protection
By jflachs34 in forum Machinery Manuals / BrochuresReplies: 0Last Post: 02-28-2012, 10:19 PM -
Eye protection
By Saurav in forum Laser Engraving / Cutting Machine General TopicsReplies: 4Last Post: 06-13-2011, 10:20 AM -
*NEWBIE* Power Line filter (Transformer vs. Filter)
By cjchands in forum CNC Machine Related ElectronicsReplies: 5Last Post: 09-26-2009, 02:36 AM -
Protection
By DDM in forum DIY CNC Router Table MachinesReplies: 2Last Post: 01-04-2007, 01:15 AM -
Way Protection
By mgamber in forum Benchtop MachinesReplies: 7Last Post: 03-10-2003, 01:59 AM
Tags for this Thread
Posting Permissions
