Gday everyone. Lets start by laughing lol. Im using a masterwood 327 and 317 (yes keep laughing... i am) and i know they ancient but really they still work... most of the time. If anyone has used or is familiar with these machines I would love a bit of help/advice/experience with these.
The problems im trying to resolve and work out whats causing them are as follows.
#1: Time out errors:-
Everything in the book give you an explanation as to what code is causing what - which the exception of the timeout errors. the two main ones are
2.1.1513 and 2.1.1520
this equates to '2 = PLC', '1 = Not important', '15 = timeout' and the last two number 13 and 20 have no explanation.
PLC errors are commonly resolved by restarting the PC (prehistoric computer) but in these cases this doesnt resolve any issue.
Not important is in my opinion prehaps a translation error from Romanian/Italian to english but unsure if this really matters.
Time out is quite simply a timeout error of 7 seconds or greater.
number 13 i believe is a micro switch response failure but given many of the numbered wires are unreadable or missing, a multimeter and test each wire approach is my last resort.
number 20 i believe has to do with the right hand spindle (T42) not receiving a message to confirm a tool is loaded.
has anyone ever come across timeout errors and have/or remember the conclusion which resolved the problem.
also does anyone have any list of timeout error and to what each code relates to?
#2: during programming i often have the computer crash with an 'unhandled exception'
"UNHANDLED EXCEPTION 0D AT 0447:00FA Error code: 0000
AX = 000D BX = 0001 CC = 0000 DX = 0000
SI = 00DA DI = 0002 BP = 0FA6 SP = 0F98
CS = 0447 Limit = 134E segment #26 of C:\MWNEW\MW309.EXE
DS = 06AF Limit = D0A8 segment #52 of C:\MWNEW\MW309.EXE
ES = 0000 Invalid segment
SS = 06AF Limit = D0A8 segment #52 of C:\MWNEW\MW309.EXE
- 0447:08F2 FA 89 46 F8 C4 5E F8 46 C4 5E F8 26 80 3F 00 74 03 E9 3A
I know this gargle is probable usless as info unless your a coder that can read code like a book but it there for your info.
I am tossing between a programming error, which I code very acuratly and these programes i have written have worked for a long time prior to these errors occuring.
and the alternate option that maybe there is a RAM problem or fault with the HDD beginning to deteriorate.
#3: On the 317 i am constantly getting another timeout error of 2.1.1510
so as above the same thing but have no direction as to what '10' is referring too.
So if anyone can assist, shed light or suggest possible or probable things that could be causing this or a test to try and fault find the issue that would be greatly appreciated.
I have contacted masterwood via email, but no response. I believe they no longer support legacy machines.
anyways.. Thankyou for any help or support.
even it the conclusion match and fuel lol.
Thankyou