I was looking at this machine: http://toronto.kijiji.ca/c-buy-and-s...AdIdZ206547580
the owner says that controller no longer works. I'ma total newb.....i know that i need a controller for this thing to work but with it being an industrial machine what controllers should I be looking into for something like this? Are there individuals or companies I can contact to inspect a machine liek this?
Results 1 to 2 of 2
-
05-30-2010, 07:36 AM #1
Registered
- Join Date
- Dec 2006
- Posts
- 7
Interestred in machine but the Controller is broken...
-
05-30-2010, 03:55 PM #2
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24223
What are they asking for it?
There are many ways to retro fit as it appears to be a standard gantry set up, anything from Mach, EMC and up.
If you want a professional assessment contact North American Industrial in Mississauga, they may be able to do one for you.
Al.CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Reply With Quote
Similar Threads
-
3 AXIS MACHINE CONTROLLER COMPUTER ALL IN ONE
By blurrycustoms in forum News AnnouncementsReplies: 0Last Post: 10-22-2008, 02:44 AM -
new machine M70 controller small problem
By Beaker in forum Mazak, Mitsubishi, MazatrolReplies: 4Last Post: 01-20-2008, 08:01 AM -
new machine need controller board
By DIRKHALLSZ in forum CNC Wire Foam Cutter MachinesReplies: 0Last Post: 12-20-2007, 03:14 AM -
Does anyone reconize this controller and machine.
By ReefkeeperCNC in forum CNC (Mill / Lathe) Control Software (NC)Replies: 4Last Post: 06-22-2006, 02:40 AM -
Post for EMC (Enhanced Machine Controller)
By curriedgoat in forum Post Processors for MCReplies: 2Last Post: 11-04-2005, 10:47 PM
Posting Permissions
