Hello eveyone,
Really hoping someone can help solve this problem. I bought a CNC machine 2 months ago and have tried everything to get it to work with Mach3 through my computer. The machine works fine with the hand held remote control but wont jog at all through the computer or run test g code cut as in the cnc doesnt move. I have not set up my table demensions yet not sure if that matters and not sure how to do that. Also when i try to jog the machine Mach 3 shows the x, y moving but cnc doesnt move.
Details
3020 Machine
Controller JY5300-2
Software Mach 3 with Lic
Computer Dell desk top 32bit windows 7 with parallel port
I went into the bios and set parallel port to ECP mode as per the intructions
Here are some screen shots so you can see my settings, fyi i have tried a bunch of settings this is where i gave up lol.
Attachment 264992Attachment 264994Attachment 264996Attachment 264998Attachment 265000Attachment 265002Attachment 265004Attachment 265006Attachment 265008Attachment 265010Attachment 265012Attachment 265014Attachment 265016Attachment 265018Attachment 265020Attachment 265022Attachment 265024Attachment 265026Attachment 265028Attachment 265030Attachment 265032Attachment 265034Attachment 265036