In Mastercam can I make a 2D print from a solid easily?
In Mastercam can I make a 2D print from a solid easily?
I dont see why not you can shift the view side to side and front to back and even isometric and measure from there. I take it you dont have mastercam right now?
We have had good luck with our Fadals milling mostly soft steel and aluminum up to 5 axis. We are always looking for spare parts If you have a broken down Fadal give a shout.
Yes go to Solids and use Solid Layout... you will have to create the Dim but you have you 2d layout in the views you need. real fast and easy.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Software and hardware sales, contract Programming and Consultant , Cad-Cam Instructor .