Hello Everyone,
I hope someone can help me, I am using a Sandvik Turbo, Capto mount, boring and OD turning tool. I have set the tool offsets for tool #8 in #8- and #18 offsets..
I program my part using CAPS selecting the tool position #8 with offset #8 for boring and tool #8 offset #18 for OD turning.
The program is generated correctly but on the OD section of the program the offsets do not change even though the operating screen shows tool 0818 being selected.
Is there a parameter change that would allow the machine to change offsets without turret index.
I hope this all make sense.
Skeney