I am supervisor of a machine shop that will be shutting down after the first of year. I have one employee that has worked for me 5 plus years, I would like to help him find another job. He is the only one in shop I would do for. He ran screw machines , then went to OD ID grinding before he came here and has done mainly large manual work since. To stay in craft he will need to move as all industry has left this area. If you have spot he will make a solid worker for someone.
Reply by private message and I will hook you up with him
Logos
Thread: Machinest placement
Results 1 to 2 of 2
-
12-05-2006, 07:20 PM #1
Registered
- Join Date
- Jul 2003
- Posts
- 51
Machinest placement
-
12-12-2006, 09:32 AM #2
Moderator
- Join Date
- Jan 2006
- Posts
- 4396
Logos,
Get this guy on Monster.com , LSI Staffing, and CareerBuilder.com
The Links
http://texas.preferredjobs.com/altse...umber=38084953
http://www.careerbuilder.com/Default.aspx
http://my.monster.com/Login.aspx
You can get this guy a good job with Swiss Screw Machines. They pay the best.
Give him a strong recomendation while the job he is at is still open for business.
I hope everything works out you guys.
BTW: if your in KY send resume's to Ohio, there are tons to choose from at good companies.
:cheers:Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com
Reply With Quote
Posting Permissions
