I am in the process of buying a VTL with a Fanuc 310i control.
Does anyone have a few programs that I can download or you can email me so I may have a look at the way the programs are. I am really interested in any thread chasing programs using G76. Is it the same as 18i?
G76 P000000 Q00 R0
G76 X0 Z0 P0 Q0 F0
Thread: Fanuc 310i
Results 1 to 4 of 4
-
03-24-2007, 11:25 PM #1
Registered
- Join Date
- Nov 2004
- Posts
- 56
Fanuc 310i
-
03-24-2007, 11:47 PM #2
Moderator
- Join Date
- Jan 2006
- Posts
- 4396
Sorry I don't have any programs for you but that
Thread Chasing Feature sounds Great for Heat Treated Parts.
Enjoy your new Control!!!!!!
Fanuc RULE!!!!!!!!!!!!!!!!
Cheers!!!!!!!:cheers:Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com
-
03-25-2007, 03:12 AM #3
Registered
- Join Date
- Nov 2004
- Posts
- 56
We use G76 to chase threads into heat treated Gasite(white iron) these parts have a 62hrc. And the threads go up to a 16" triple lead 19" long. Also this is a 15,000lbs part. Machine turns 100RPM @ 300IPM. Pretty neat...
Someone please forward me a sample program for the 310i. Thanks
-
11-05-2007, 02:25 AM #4
Registered
- Join Date
- Nov 2004
- Posts
- 56
Well I ended up going to a week long course provided by G&L. Not a whole lot of difference's in the programming from the 18 except you can no longer use "U" and "W" as an incremental move.
Reply With Quote
Similar Threads
-
FANUC & GE FANUC Repairs
By RRL in forum News AnnouncementsReplies: 1Last Post: 04-17-2011, 05:50 PM
Posting Permissions
