Hi,
Can anyone out there give me an idea of what the static load reading on the Z axis should be? (Read from the servo tuning page)
Our maintenance crew were working on the keeper plates and botched it up, now I've been given the job of fixing it. We burnt out the Z axis amplifier last week as a result of excessive load. (was over 100% static at one stage)
Thanks!
Thread: ACE V400 Z Axis
Results 1 to 2 of 2
-
09-27-2007, 06:59 AM #1
Registered
- Join Date
- Sep 2007
- Posts
- 47
ACE V400 Z Axis
-
10-05-2007, 01:23 AM #2
Registered
- Join Date
- Sep 2007
- Posts
- 47
Found the problem. Our maintenance "experts" milled the keeper plates instead of grinding them to compensate for wear. This resulted in out of square, warped and odd sized plates. We have ordered new plates, meanwhile , I shimmed the old ones and re-installed them to bring the load values down to normal (23%). It's hard to find good help...................
Reply With QuoteSimilar Threads
-
A 5-axis CNC machine including a rotary axis
By synthetiklone in forum CNC Wood Router Project LogReplies: 20Last Post: 07-12-2013, 09:32 AM -
the Difference of 2-Axis and 3-Axis of Vertical Mill Machine
By begacon in forum Knee Vertical MillsReplies: 6Last Post: 07-30-2009, 12:31 PM -
Using X axis table moter for knee X axis
By imatoymaker in forum Uncategorised MetalWorking MachinesReplies: 1Last Post: 09-10-2007, 01:23 PM -
New Design - Hybrid 3-Axis Router/4-axis Foam Hot Wire Cutter
By the__extreme in forum CNC Wood Router Project LogReplies: 3Last Post: 02-26-2007, 09:58 PM -
Options for 2 Axis Head (to make 5 axis)
By drewgarth in forum DIY CNC Router Table MachinesReplies: 6Last Post: 07-12-2006, 06:37 AM
Posting Permissions
