Just received a new Grizzly Drill press Only $199 plus shipping. Unbelievable.
Just received a new Grizzly Drill press Only $199 plus shipping. Unbelievable.
Sweat shops?
Dustin B.
================
I hear and I forget.
I see and I remember.
I do and I understand.
Not exactly....labor costs are very low....limited environmental regulations....
No OSHA, .60 cents an hour, lawsuits are rare, hard workers, very limited benefits, loose tolerances, thick paint, all in all a dang good value
Many complain about import products but without them most of us would not have much in the way of machinery or equipment, at least initially.
DieGuy,
I just looked at you picture again, you can purchase storage shelves much cheaper
Originally Posted by Ken_Shea
LMAO! They are all full as well!
These are the ones Harbor Freight sells, right?
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Check Out My Build-Log: http://www.cnczone.com/forums/showthread.php?t=6452
I got this from Grizzly Tools. So far the assembly looks good and the quality not to bad. The only things I did was partial disassembly, debur, clean and lube it up properly with some lubriplate. Pretty heavy duty and real configurable for the money. I did take a while to show up but most of that was trucking. Pretty satisfied for the money.Originally Posted by JavaDog