603,979 active members*
3,468 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > EdgeCam > G43 line after tool changes issue.

Thread: G43 line after tool changes issue.

Results 1 to 4 of 4
  1. 07-08-2010, 03:34 PM #1
    Ecmdrw5
    Ecmdrw5 is offline Registered
    Join Date
    Jun 2006
    Posts
    59

    G43 line after tool changes issue.

    I seem to be having and issue with it not posting my tool height offset line on Tap and Reaming cycles but it does on all other cycles(Bore, Drill, Peck Drill) as well as any milling cycles. According to the Debug it seems to be missing the Rapid After Toolchange code constructor. Any ideas.
    Reply With Quote Reply With Quote
  2. 07-08-2010, 11:40 PM #2
    MIKEL12
    MIKEL12 is offline Registered
    Join Date
    Aug 2005
    Posts
    80
    I usually have G43 together with toolchange, not afterwards in "rapid after toolchange".
    The simple explanation is that its not certain that you will rapid after the toolchangi

    Example
    M6 T4
    G43 H4 Z100
    Reply With Quote Reply With Quote
  3. 07-09-2010, 07:20 PM #3
    Ecmdrw5
    Ecmdrw5 is offline Registered
    Join Date
    Jun 2006
    Posts
    59
    Duh! Why didn't I think of that, lol. Thanks a lot.
    Reply With Quote Reply With Quote
  4. 07-10-2010, 04:46 PM #4
    MIKEL12
    MIKEL12 is offline Registered
    Join Date
    Aug 2005
    Posts
    80
    It's easy to get lost in the complication of a simple problem
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. tool change issue
    By Diedesigner in forum Uncategorised MetalWorking Machines
    Replies: 11
    Last Post: 01-26-2013, 05:56 PM
  2. MV40E Tool Pot Issue
    By JohnnyTurn in forum Mori Seiki Mills
    Replies: 3
    Last Post: 06-09-2009, 06:34 PM
  3. Coordinate Line Cad Tool
    By truefordlover1 in forum BobCad-Cam
    Replies: 11
    Last Post: 08-04-2008, 02:15 PM
  4. Single line font issue
    By pcbmiller in forum Uncategorised CAM Discussion
    Replies: 0
    Last Post: 03-24-2008, 08:06 PM
  5. Water-Line Tool Path with BCC
    By Kiwi in forum BobCad-Cam
    Replies: 5
    Last Post: 06-12-2007, 11:36 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules