[klem1212@gmail.]

I am trying to find out how to put the subprogram from workshop to emco . do I put the subprogram part 1 in then goto subprogram
example
t3
n5 G17 640 G80
N10 G90 G94 G98
N15 G54 X0.0 YO.O
N20G43 T3 H3 Z1.0
N25 M3 S1000
N30 GO X-2.5625 Y-.750
N35 M98 P00018100
N40 GO X-1.8125 Y-1.0 Z.1
N45 M98 P00018100
N50 GOX-1.0625 Y-1.250
N55 M98 P00018100
N60 GO X1.O Y1.0
N45 M30

O8100
N5 G91 G1
N5 G1
N10 G1
N15 G1
N20 GO
N25 M99

[ipmmiller]

need to know what Emco machine your trying to program,is it an F1?

[beege]

Looks good to me, but it'll be hard to run a program like that if you mix up all your Oh's and Zeroes. What control is on your EMCO? Fagor? Fanuc?

[klaasvaak]

Please teel us wich controller
emco?........


and how does the program looks in the subprogram
do you have a emco program manual?

[cnc_swe]

t3
n5 G17 640 G80

It is not necessery to work with line number but if you have some trubble you cant find it out without numbers.
Loook at this line T3 perhaps you ned T3 D3

N4 T3D3
N5 G17 640 G80 what is 640? This is wrong, maybee you chould try G40.