[Shawn271981]

I am looking for a post processor to be able to use my CNC machine which has a Fagor 8055 controller.
The machine is a Prussiani Oceania shown in the picture.

We have Alphacam 2003.

Any help or a lead on who could help me would be greatly appreciated.

Thank you!

[keelhauled]

If you look through the list when you go to save your file there is a pp for Prussiani. I used to use AlphaCam V7.5 but now I mostly use Vectric.

[Shawn271981]

I tried to check, but it didn't come with the one for Prussiani, is it something you could send me?

[keelhauled]

Even though I've a registered copy of Aspire on CD/DVD as far as I know I'm still using the trial version I downloaded from the Vectric site, I just havent needed to re-load it. When you are ready to cut and you click on the little icon like a floppy disc to save the file you get a list of pp's and Prussiani(mm) is there. The only way I know of sending you a copy is if I put it on CD and post it to you which is no problem. [email protected]