[denmar]

I own a small CNC shop in North Hollywood, CA. looking for work.
[email protected]

[FUBAR62172]

I own a small machine shop in SE Mass. looking for work.

(wedge)

[Runner4404spd]

guys it would help to post what kind of equipment you have so people know what to send you to quote. however, begging for work on the internet rarely works.

[RevEdo]

I wouldn't call it "begging" one bit. Networking? Yes.
Ease up on em ffs.
Don't be so condescending my friend. You too, might resort to begging one day.

However, he is correct, without a facilities list, you will have close to zero luck.

Websites are cheap, and pictures are worth the proverbial.

[Runner4404spd]

I have done my fair share of begging for work, however its all been done face to face and not over the internet. my point was that posting a random one liner on a cnc site where people are supposed to be offering work usually won't work as the traffic isn't correct for that type of advertising. hopefully they take it as corrective criticism.

[gabedrummin]

4 axis Fanuc wire edm , Manual workman sinker Edm .6x12 harig surface grinder , bed type manual Mill 9x 48 . 10 x 36 lathe , small cnc mill for electrodes, cad and cam service..