603,929 active members*
3,132 visitors online*
Register for free
Login

Thread: 6040z NO POWER ON THE CONTROLLER

Results 1 to 2 of 2
  1. 11-17-2015, 04:55 PM #1
    hayesbr1
    hayesbr1 is offline Registered
    Join Date
    Aug 2015
    Posts
    2

    6040z NO POWER ON THE CONTROLLER

    I just purchased a chinese 6040z and when I ran a program it crashed the z axis down on the workpiece. Then everything shut off as if the whole controller were unplugged. Now I can't get it to come back on. I've unplugged and re-plugged it in. Cycled the emergency stop and still nothing. There is a fuse inside the power supply but it does not appear to be blown. I'm going to check it with a meter tonight. Has any one else had this problem? Any suggestions if the fuse tests ok?
    Reply With Quote Reply With Quote
  2. 11-20-2015, 03:28 PM #2
    Dean Elliott
    Dean Elliott is offline Registered
    Join Date
    Nov 2015
    Posts
    32

    Re: 6040z NO POWER ON THE CONTROLLER

    In an effort to consolidate all of the 6040 and 6040z threads please post here: http://www.cnczone.com/forums/open-s...ml#post1790768
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. 6040Z-DQ
    By wdp67 in forum Chinese Machines
    Replies: 0
    Last Post: 09-30-2015, 01:32 PM
  2. CNC 6040Z A131NBC-9015 VFD Controller Issues
    By Gunmeisters in forum Commercial CNC Wood Routers
    Replies: 0
    Last Post: 03-12-2014, 04:02 PM
  3. controller power supply 115/230v OK for Australian power?
    By Momill in forum Australia, New Zealand Club House
    Replies: 8
    Last Post: 07-07-2011, 05:06 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules