[nycooh]

Hi,

I just hired in to a place that has a vintage (80's) machine center. There is no one to ask about this bad boy, so I'm on my own. Could anyone provide me with some program examples for simple multi-tool, multi-part set ups. Gonna be mostly drilling and slotting copper. I am totally clueless as to even how to structure a working program. Any help would be most appreciated in iso or conversational format.

Rich
[email protected]

[RMARCH]

Hi,

I just hired in to a place that has a vintage (80's) machine center. There is no one to ask about this bad boy, so I'm on my own. Could anyone provide me with some program examples for simple multi-tool, multi-part set ups. Gonna be mostly drilling and slotting copper. I am totally clueless as to even how to structure a working program. Any help would be most appreciated in iso or conversational format.

Rich
[email protected]

Hi Rich,
I would use the conversational format. It is much easier to program and Heidenhain has some great canned cycles. I emailed you a couple example programs.

Good luck !!

[gridley51]

You can download programming manuals for free here.

http://filebase.heidenhain.de/doku/o...D7/N142D7.html

[mikemtz123]

Hi Rich,
I would use the conversational format. It is much easier to program and Heidenhain has some great canned cycles. I emailed you a couple example programs.

Good luck !!

can you email me too please !!!