[drjimmy]

I started a new thread so my question is more defined.
I have been through the forums and I seem to have found some issues with subprogram names that aren't working but should.

Work: OT
OL
ORT
Don't work: OR

Why does OT and OL work but OR not?

Also, OC516 and O516C do not. I saw a post that said OCH12 worked but why not OC516? I really need to figure out how to get 1 letter and 3 numbers to work after the initial O. O5161 and O5162 will not work for a description. I need to get a C or P worked in there before or after the 516. Any help is appreciated. thanks!

james

[broby]

OR will not work because it is a reserved word.
i.e. OR is an expression that is used to test if bit xx "OR" bit yy is equal to a certain state.

Usually a Subprogram name is limited to 4 characters after the letter "O" (oh).
Usually if you start of a subprogram name with a digit you must use only digits.
If you start with a Alpha character you should be able to use any combination of Letters or numbers after the first Letter.
As for why "OC516" does not work...? What alarm/Error comes up?
Regards
Brian.

[broby]

whoops hit submit twice...