[disacnc]

I had several servos from Pacific scientific p/n r46ssna-ss-ns-ns-02 and R33ssnc-ns-nv-02 and I am locking for their manual or what kind of control they use, but I cant find anything, pac sci was bought from other company.

thanks

[Al_The_Man]

I believe Pac Sci was bought out by API/Gettys and then taken over Parker with Kollmorgen.
Are these DC servo's?
Al.

[disacnc]

this is the plate

[mike_Kilroy]

I have catalogs on these; email me as reminder to send u.

pacsci was never associated with gettys; they were bought directly by danaher/kollmorgen, who also bought api.

[Al_The_Man]

I have catalogues of API-Gettys and I believe if you search the internet you can find references to the same?
Al.

[mike_Kilroy]

Both ur requested motors are in the Pac Sci old motor catalog - email me and I will send.

[disacnc]

yes please.

sendme all info you have please.

and if you can recomend to me they drives cards I ll appresiate...

thanks.

[judleroy]

What do you plan to use those motors for? Those are high power motors. 84 volts per1000 rpm is a lot. So is 10 amps assuming that is continuos.
Judleroy

[mike_Kilroy]

yes please.

sendme all info you have please.

and if you can recomend to me they drives cards I ll appresiate...

thanks.

HOW?

I have full info on both motors, but I have no clue what your email address is! How am I supposed to send info to you if you dont EMAIL or PM me or at least put ur email address in a post here?

[Al_The_Man]

I show three model options of drives for those motors, one digital command, the other two with ±10vdc analogue and one has encoder simulation output.
These drives are the same vintage as the motor, so there could be later models now?
Al.

[disacnc]

[email protected]

I also have the

r33ssnc-ss-ns-nv-02 motor from pacsci also. do you have the manual??

I plan to use a kollmorgen drive CE06250 for this motor, but I still do not if that could work

as you notice, I am new on this, if you can help me with this I'll appresiate, and if you need those motors just writeme, they are cheap!!

thanks.

[mike_Kilroy]

manual on all 3 on its way.

ce drive is encoder feedback; i think ur pac sci motors may have resolvers tho....

[disacnc]

yes they have resolvers.

but in the manual you send me, just show the series R30 whit no brake, but I still dont have a clue what r the others numbers for!

but thanks any way.

if you have more info please send it to me.

[mike_Kilroy]

this does not show data on ur motors? I did not look CLOSE but sure seemed to show it....

[disacnc]

this part no doesnt match with the pn selection, I mean the model is there but the others letters not!

R46ssna-ss-ns-ns-02 and
R33ssnc-ns-nv-02