Hi, looking to change career. Have a love for machinery and computers, would like to operate cnc. Is there any free courses or lit on the subject.
Thanks to all
Chris
Thread: Course
Results 1 to 7 of 7
-
11-07-2005, 02:24 AM #1
Registered
- Join Date
- Nov 2005
- Posts
- 7
Course
-
11-07-2005, 02:45 AM #2
Registered
- Join Date
- Feb 2005
- Posts
- 753
Where you located?
-
11-08-2005, 12:32 AM #3
Registered
- Join Date
- Nov 2005
- Posts
- 7
Maine central part.
-
11-08-2005, 12:55 AM #4
Registered
- Join Date
- Feb 2005
- Posts
- 753
move down to florida i'll teach ya
-
11-08-2005, 01:21 AM #5
Gold Member
- Join Date
- May 2005
- Posts
- 1810
There's an offer that should be hard to pass up!
Consistency is a good thing....unless you're consistently an idiot.
-
11-08-2005, 11:55 PM #6
Registered
- Join Date
- Nov 2005
- Posts
- 7
I wish you were in the Maine area!!!! I do have an A+ certification in computers and a boiler license, which means very comfortable with working on large equipment.
-
11-10-2005, 10:09 PM #7
Registered
- Join Date
- Nov 2005
- Posts
- 89
check around for local trade schools in your area. They will sometimes have a fancy name for the course of study. My local trade school called it "Machine Tool Technologies". It was fairly cheap as well, much cheaper than at the university. pell grants and scholarships are usually available as well.
Reply With Quote
Posting Permissions
