I need a small prototype cavity mold milled from HDPE block (PDF illustration attached). No dimensions on the PDF, but the rough overall block dimensions are 8" x 6" x 1.5". Interior vertical walls have slight draft angles (2-5 degrees) and the interior finish should be very smooth.
I'd prefer to keep the work near Houston, if possible, but distance is not necessarily a deal killer. Depending on how well the prototype works out, I'll probably need larger (multi-cavity) molds of this and other types in the future.
I have 3D CAD renderings available in several file formats. Please PM me for details and quote submittal.
Thanks,
R. Andrews
Results 1 to 3 of 3
-
02-13-2012, 10:44 PM #1
Registered
- Join Date
- Feb 2012
- Posts
- 0
RFQ: Simple Cavity Mold in HDPE - Houston, TX
-
02-17-2012, 02:43 PM #2
Registered
- Join Date
- Jan 2006
- Posts
- 4
Send cad file to me I also use Alibre. Also send phone number and best time to call.
[email protected]
-
02-17-2012, 08:35 PM #3
Registered
- Join Date
- Feb 2012
- Posts
- 0
Appreciate the interest; RFQ now closed.
Quotes are currently under consideration. Will advise winning bid by PM or direct email. Thanks to everyone.
Reply With QuoteSimilar Threads
-
CNC cut cavity in HDPE block
By JTH in forum RFQ (Request for Quote)Replies: 4Last Post: 09-30-2011, 09:12 PM -
RFQ: Need simple mold HDPE/wood will work.
By thefirstdude in forum RFQ (Request for Quote)Replies: 2Last Post: 08-24-2011, 03:34 AM -
Finishing a Mold Cavity
By eliot15 in forum GibbsCAMReplies: 3Last Post: 08-05-2011, 02:52 AM -
v22 mold cavity help
By chromic20 in forum BobCad-CamReplies: 2Last Post: 09-23-2008, 11:07 PM -
Mold cavity
By kojack in forum MadCAMReplies: 1Last Post: 11-01-2007, 08:22 PM
Posting Permissions
