Here are some pics of my upgraded drive. Seems to work really well. Capable of speeds up to 450 ipm until some binding occurs. Well worth the money and would do it over in a heartbeat.
Sent from my iPad using Tapatalk HD
Results 1 to 2 of 2
-
04-22-2012, 01:43 PM #1
Registered
- Join Date
- Feb 2011
- Posts
- 0
Torchmate Upgrade to CNCRouterparts Rack & Pinion
-
05-01-2012, 03:26 AM #2
Registered
- Join Date
- Feb 2011
- Posts
- 0
Here is another pic of the Y axis I finished upgrading today.
Sent from my iPad using Tapatalk HD
Reply With QuoteSimilar Threads
-
calculatiing pinion size for rack and pinion setup
By Apples in forum DIY CNC Router Table MachinesReplies: 4Last Post: 08-06-2015, 11:18 AM -
dual pinion rack and pinion anti backlash
By johngalt47 in forum DIY CNC Router Table MachinesReplies: 14Last Post: 06-12-2011, 04:04 AM -
Rack and Pinion- rack tensioned to pinion?
By Rees Guitars in forum Linear and Rotary MotionReplies: 2Last Post: 05-09-2011, 06:05 PM -
Cross Shaft / Rack and Pinion Upgrade
By AZBBQGrills in forum DynaTorchReplies: 5Last Post: 02-28-2011, 01:19 PM -
Torchmate Rack and Pinion Size
By techie4971 in forum TorchmateReplies: 0Last Post: 07-31-2007, 06:04 AM
Posting Permissions
