I am new to this forum and one who needs some help. I was into machining back in the early 80's and haven't kept up on what been going on. I have a need to buy a small VMC. I am located in So Cal. I have been reading all of the different advise on Haas Vs Fadal and others. I like the Haas VF2 but they can't meet my delivery. Fadal has a reman 3016 with 10k and MPCNC control. If anybody has input on Fadal's remain quality or any personal exp. Any help is greatly appreciated.
Thanks Mike
Thread: Reman Fadal
Results 1 to 4 of 4
-
11-23-2005, 08:15 PM #1
Registered
- Join Date
- Nov 2005
- Posts
- 1
Reman Fadal
-
11-23-2005, 08:40 PM #2
Registered
- Join Date
- Apr 2003
- Posts
- 348
Do a search with cnc zone theres a ton of info on Fadals
http://www.cnczone.com/forums/search...earchid=404129
-
06-06-2013, 08:41 AM #3
Registered
- Join Date
- Jun 2013
- Posts
- 0
Hi,
Contact Dave Madden at M & M CNC he does a fine job remanufacturing FADAL's tell him Robert Mac Clellan sent you,he's an honest helpful person.
Best Regards,
Robert Mac Clellan
FADAL Service Technician
-
06-06-2013, 08:44 AM #4
Registered
- Join Date
- Jun 2013
- Posts
- 0
Hi Again ,
Sorry too many hours working ,his cell # is( 818 ) 974 - 3992.
He will do you right and he is located in Chatsworth.
Best Regards,
Robert Mac Clellan
Reply With Quote
Posting Permissions
