Skycraft (Orlando,FL)
24VDC 10.5Amp Power Supply SK1115
100-240V 50/60Hz In, 24VDC 10.5Amp Out.
Switching Power Supply. Fully protected against short circuit and output overload. Main output voltage adjustment: +5%. An additional 12 Vdc, 250 mA output suitable for powering a dc fan is included. Dims: 8"L x 5"W x 1-3/4"H Weight: 2lbs, 3oz.
Or would a regulated power supply be the best choice for a HF44991 w/ Xyotex 3 way?
Thread: would this work for a PSU?
Results 1 to 3 of 3
-
05-17-2006, 10:27 PM #1
Registered
- Join Date
- Apr 2006
- Posts
- 17
would this work for a PSU?
-
05-18-2006, 06:15 AM #2
Gold Member
- Join Date
- Aug 2004
- Posts
- 2849
Well welcome.......what you're asking is will a switch mode supply work......yes, it will work......and a linear supply will also work......what you need to determine is which stepper you are using.....
-
05-18-2006, 01:39 PM #3
Registered
- Join Date
- Apr 2006
- Posts
- 17
im using Automationdirect STP-MTR-23079 (MOTOR, STEPPER, 276 OZ-IN, NEMA 23, BIPOLAR) and the 3 Axis Drive by xylotex.
Reply With Quote
Posting Permissions
