Hello guys!
I have primus 2 cnc turning machine with controller sinumerik 3t…
If I change a tool, the turret turns only in one direction. Can I choose the direction? Or does the controller choose the shortest way?
Regards
Results 1 to 6 of 6
-
06-10-2008, 01:33 PM #1
- Join Date
- Apr 2008
- Posts
- 6
-
06-16-2008, 09:46 AM #2
- Join Date
- Apr 2008
- Posts
- 6
Hello guys!
It is possible to choose the direction of turret turning, isn’t it????
Thanks!
-
06-16-2008, 10:05 AM #3
- Join Date
- Dec 2001
- Posts
- 469
Hello realstyler!
I’m almost sure that the controller chooses the shortest way itself. If it’s not desired, you have to program a whistle stop. Then it will be first turned to the whistle stop, and then to the end position. And a minimal traverse path between them.
Regards WalterEs geht nicht nebeneinander, schon gar nicht gegeneinander,<br>es geht nur <b>miteinander</b>.
-
06-16-2008, 11:29 AM #4
Junior Member
- Join Date
- Apr 2002
- Posts
- 5003
I believe it depends on the machine.
I personally know only that the shortest way is chosen. But I have experience only with 2 or 3 turning lathes.
-
06-18-2008, 10:14 AM #5
- Join Date
- Apr 2008
- Posts
- 6
Thanks for your help!
But my problem is that the turret turns only in one direction. Doesn’t matter which tool I choose…
Regards
Serkan
-
06-18-2008, 10:56 AM #6
- Join Date
- Nov 2005
- Posts
- 71
Bidirectional turning is possible only with machines of new generation.
The old Siemens can’t do that.
Regards
Marlin
Reply With Quote
Posting Permissions
