Hello everybody
We’re going to machine parts from 1.4980 (high temperature-resistant).
Turning, milling, drilling, thread milling.
Who’s got experience with this material?
We’re interested in:
What cutting inserts did you use?
What section meters / feeds did you move?
What borers are considered?
Etc.
Results 1 to 2 of 2
-
01-09-2009, 02:53 PM #1
- Join Date
- Feb 2006
- Posts
- 388
<!--sizeo:3--><span style="font-size:12pt;line-height:100%"><!--/sizeo--><!--coloro:red--><span style="color:red"><!--/coloro-->Auch wenn deine Steuerung dir sagt, das sie das nicht kann. Gibt es doch immer einen Weg sie von Gegenteil zu überzeugen.<!--colorc--></span><!--/colorc--><!--sizec--></span><!--/sizec--><br /><br /><!--coloro:#000000--><span style="color:#000000"><!--/coloro--><!--sizeo:2--><span style="font-size:10pt;line-height:100%"><!--/sizeo-->Ach ja.<b> Variabel</b> war früher<b> Speedy1</b>.<!--sizec--></span><!--/sizec--><!--colorc--></span><!--/colorc-->
-
01-09-2009, 06:18 PM #2
- Join Date
- Feb 2008
- Posts
- 49
Hello Speedy1
I recently chipped “your” material at our BAZ.
I used cutters from Fraisa, VHM roughing cutter SX-FP with 12mm diameter.
I moved vc=25m/min with ap=13mm ae=9mm. Fz 0,03.
I made my bores of D=8mm with VHM Spibo with IKZ.
Drilling depth 25mm, Vc= 30m/min.
It went very well but I wouldn’t like to make it always.
Regards, Klaus
Reply With Quote
Posting Permissions
