603,898 active members*
4,776 visitors online*
Register for free
Login

Thread: G50 and G92

Results 1 to 3 of 3
  1. 11-15-2014, 09:06 PM #1
    albasha79
    albasha79 is offline Registered
    Join Date
    Oct 2014
    Posts
    15

    G50 and G92

    plz guys help me ..... what the difference between the g code command G 50 and G92 in lathe machine cnc .
    Reply With Quote Reply With Quote
  2. 11-16-2014, 01:42 PM #2
    angelw
    angelw is offline Registered
    Join Date
    Sep 2010
    Posts
    1230

    Re: G50 and G92

    Quote Originally Posted by albasha79 View Post
    plz guys help me ..... what the difference between the g code command G 50 and G92 in lathe machine cnc .
    If the control is equipped with the G Code System A, G50 is used to set the Coordinate System and to limit the spindle revs in G96 Mode. G92 in G Code System A is a Thread Cutting Cycle. When the control is equipped with G Code System B or C, G92 is used in the same way as G50 in G Code System A.

    Regards,

    Bill
    Reply With Quote Reply With Quote
  3. 11-16-2014, 11:22 PM #3
    albasha79
    albasha79 is offline Registered
    Join Date
    Oct 2014
    Posts
    15

    Re: G50 and G92

    manay thanks
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules