Ok the problem is all gcode i create with solid cam is fine except that it automatically fillets the corners to half the bit diameter. By the way im using Mach3 as a controller.
Results 1 to 2 of 2
-
09-19-2006, 06:44 PM #1
*Registered User*
- Join Date
- Mar 2006
- Posts
- 49
Solid cam issue, filleted corners in g code
-
09-19-2006, 11:15 PM #2
Moderator
- Join Date
- Sep 2005
- Posts
- 1660
What kind of tool are you using? Have you tried going into tools and edited the tool to be an end mill or bull end mill instead of a ball end?
How do you like using it w/ Mach [ post processors etc?] Are you doing only 3 axis of more?
I'm not a current user but I downloaded the manual's and have been reading them so.. I'm by no-means an expert.
JerryJerryFlyGuy
The more I know... the more I realize I don't
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Reply With Quote
Posting Permissions
