603,387 active members*
2,766 visitors online*
Register for free
Login

Thread: GRBL for H-Bridge Mod

Results 1 to 2 of 2
  1. 08-27-2015, 08:07 PM #1
    manijac
    manijac is offline Registered
    Join Date
    Feb 2007
    Posts
    2

    GRBL for H-Bridge Mod

    I need Grbl Firmware (hex) for Adafruit Motor Shield v1 https://www.adafruit.com/products/81.
    Reply With Quote Reply With Quote
  2. 08-31-2015, 06:24 PM #2
    LandySimon
    LandySimon is offline Registered
    Join Date
    Jun 2014
    Posts
    5

    Re: GRBL for H-Bridge Mod

    Quote Originally Posted by manijac View Post
    I need Grbl Firmware (hex) for Adafruit Motor Shield v1 https://www.adafruit.com/products/81.
    To be fair i would not use that. I would use the CNC shield (loads on ebay). grbl isn't designed to drive an h bridge, only a stepper driver with a step, direction and enable input.

    Simon
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. GRBL PCB
    By crob09 in forum CNC Machine Related Electronics
    Replies: 3
    Last Post: 02-28-2018, 05:22 PM
  2. Looking for a GRBL forum. Where ?
    By someguy123 in forum OpenSource Software
    Replies: 3
    Last Post: 03-23-2013, 11:40 AM
  3. Half bridge or Full bridge
    By bunalmis in forum CNC Machine Related Electronics
    Replies: 3
    Last Post: 04-13-2008, 08:11 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules