[russrex]

Turns out I don't have time to work with this nearly brand new CNC anymore. This is a steel for anyone that wants a great machine that has been set up and hardly used. Estimated 15 hours of operation.

The items on my original invoice are listed below. Invoice amount paid $24,853.46. Asking $18,640.10. That's 25% off a like new machine. I am also willing to separate the items at the same rate.

PCNC 770 CNC milling machine Series 3 with automatic oiler(Machine Package 31749)
Stand for PCNC 770
Coolant Tank, pump and hose Backsplash
Chip Guard Kit for PCNC770 Coolant Kit for 770
Lift Bar, dual purpose 770 and 1100
Machine Arm
TTS CNC Operations Set - deluxe
TTS-JT1 with ATC geometry
Keyless Drill Chuck 1/4" - JT1 (0.5~6 mm)
TTS-JT2 with ATC geometry
3/8" Keyless drill chuck 3/8" (1~10 mm) - JT2
TTS-Boring 7/8 x 20 with ATC geometry Boring Head for 7/8 x 20 mount 1/2" bar
Boring Bar Set - 1/2"
TTS-ER20 with ATC geometry
ER20 1/8" Collet
ER20 3/8" Collet
ER20 1/4" Collet
TTS Tooling for the Deluxe package
TTS Super Fly (Assembly)


Uncoated, polished, and ground Inserts Use with coolant for cutting
aluminum.Korloy SEHT 43 AFFN X83 H01
General purpose grade Insert. Coolant is optional. Korloy SEHT 43
AFSN X45 PC3500
Anti-seize for insert screws
TTS Diamond Engraver Kit (D40431) Assembly
TTS-1/2" shell arbor with ATC geometry
38 mm face mill for 1/2" arbor use screw: 31254 insert: 31253 and tool:31247 add 91251A440 Black-Oxide Alloy Steel Socket Head Cap
Screw 1/4"-28 Thread, 3/4" Length
Carbide Insert : APGT1135PDFR-G2-HTI10 for cutting Aluminum
Tormach Machine Controller for PCNC (mouse)
LCD 17" Computer Monitor
Shuttle Jog Controller
Mini Keyboard
Keyboard Cover
USB Extension - 10FT USB 2.0 A to A Male/Female
Video Extension - 10FT SVGA Super VGA M/F Monitor Cable w/
ferrites
4th Axis kit - 6" Tilting Motorized Rotary Table (Includes 31847 Table and 30488 4th Axis kit)
Tailstock for 6"
3* Jaw Chuck for 6" Table (includes 30268 Chuck and 30269 Plate)
4* Jaw Chuck for 6" Table (includes 31417 Chuck and 31418 Plate)
Kress 800 Watt High Speed Spindle Kit
Basic 3 Piece Indicator Set: Dial Indicator, Range Indicator, and Magnetic Base
MC-5 Vise
Work Stop for Vise
Alignment Key for 5" CNC machine Vise sold in pairs 58 PC Pro Quality Steel Clamp Kit
PCNC 770 Power Draw Bar
Syclone 4610 Air Compressor NOTE: Minimum kick-in pressure must be preset to 95 PSI or above
Kit, pneumatic connection for Power DB and ATC
Filter, Regulator, Lubricator Kit (assembly)
770 Power DB Draw Bar
Tension/Compression Tapping Head Kit w/ collets and wooden case with
ATC geometry
(Incl. TD_Tapping_Guidelines).
Pin spanner with 2.9 mm pins. High carbon tool steel is with vinyl coated handle
TTS Automatic Tool Changer PCNC770 Series 3
Serial Number:
Pressure sensor accessory for ATC
Floating Tramp Oil Collection Pillow, 0.5 gal absorbing capacity
Perkins Perlube WL-68 Way Oil
Premier 600 Synthetic Coolant
G Wizard Software (sent by e-mail)
IronCAD Inovate for Tormach SOFTWARE IS NOT RETURNABLE
SprutCAM,V8 PCNC owners, PCNC post w/support SOFTWARE IS
NOT RETURNABLE
Machine Package for PCNC 770 with Licensed Software with automatic oiler
Tool Up with Tormach TTS Promotion

[brian257]

I tried sending you a PM, but I don't see it in my sent mail folder. I will try again. Might not have gone out since I sent my email address and phone number. Could you call me at 904 five three six seventeen eighty. I am about to order some tooling and want to check with you before I buy direct from Tormach.

[sin_arms]

Not really an Ebay add... Plus where are you located?

[russrex]

I am located in Atlanta, GA. The machine is still available.

Do note that the tooling will either be sold with or after the machine goes.

[Rachel73]

I tried sending you a PM, but I don't see it in my sent mail folder.

[cmparts]

I am located in Atlanta, GA. The machine is still available.

Do note that the tooling will either be sold with or after the machine goes.

I am in Charlotte NC, would like to talk. 704-460-three seven eight five.
Michael