603,953 active members*
3,409 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Benchtop Machines > Taig Mills / Lathes > Debating between Mini-IO and PMDX Servo Drives for Taig

Thread: Debating between Mini-IO and PMDX Servo Drives for Taig

Results 1 to 3 of 3
  1. 12-19-2006, 02:51 AM #1
    Burn
    Burn is offline Registered
    Send a message via AIM to Burn
    Join Date
    May 2006
    Posts
    249

    Debating between Mini-IO and PMDX Servo Drives for Taig

    http://www.candcnc.com/Mini-IO.htm
    ^Mini-IO 2

    http://www.pmdx.com/PMDX-122/index.html
    ^PMDX 122

    Can anyone highlight any advantages between these two? The Mini-IO seems really compact, which is always a plus Also includes a neat diagnostic lighting setup so you can see the pulses

    Would be paired with an IMService 4A kit (Servoes, individual servo drivers and cabling) 4-axis servo setup, bolted up to a Taig 2019 mini-mill.

    Any input would be greatly appreciated...As I am going to order one within 2 weeks.

    Thanks guys, really appreciate it
    Burn
    Reply With Quote Reply With Quote
  2. 12-21-2006, 05:01 PM #2
    Burn
    Burn is offline Registered
    Send a message via AIM to Burn
    Join Date
    May 2006
    Posts
    249
    Bump...Gonna order the IMService motors now.
    Reply With Quote Reply With Quote
  3. 12-22-2006, 03:54 AM #3
    Burn
    Burn is offline Registered
    Send a message via AIM to Burn
    Join Date
    May 2006
    Posts
    249
    Okay, updated to include the PMDX-122. Steve @ PMDX reccomended that one over the 120 because it's got more features...IT's also $81, which is always a plus
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules