[lenny09]

How would I do this in Gibbscam?
I know this isn't difficult to do by hand but would like to be able to do this in Gibbscam.
Have to do this some times. Smallest boring bar we have is 1".

I believe the attached photo shows Helix Bore but it don't have the option for Polar & Cylindrical Milling.

Any input would be greatly appreciated.

(FEED INTERPOLATION)
(1/2" HSS ENDMILL)
(HORIZANTALLY)
G40G98G80
G0G54X16.Z12.
T700
M35
G28H0.
G50C0
G97S4000M33
G0Z.1C0.T707
X.46
M8
G1Z0.F20.
Z-.2C720.F40.
X0.
G0Z.1M9
X16.Z12.T700
M30