When I turned on my Burgmaster 6M-b today and after homing the machine I tried to change tools it unlocked the tool in the spindle and stoped responding. In the alarm external messages screen it displays that the machine need to be referenced x,y,z ,this message usually goes away after homing but even pressing the RESET doesn't clear this message now. The machine does home and the x,y,z home lights come on. They are lights in the jog buttons. THe machine worked fine yesterday. Any clues on where to start looking for this problem will be apperacted. Also I jumped the logic side of the opto 22 relay that controils the solonid that removes the tool from the spindle and the tool changer finished its cycle putting the requested tool in the spindle.
Thanks Drew __________ me(wedge) Burg