603,793 active members*
2,453 visitors online*
Register for free
Login

Thread: mach3

Results 1 to 2 of 2
  1. #1
    Join Date
    Sep 2016
    Posts
    2

    mach3

    Trying to get ride of the "external e-stop requested" message on the computer. When I hit the reset after starting Mach 3 I will get this message and can not get out of it. If anyone has any suggestions on how to get past this it would be appreciate.

  2. #2
    Join Date
    Mar 2010
    Posts
    813

    Re: mach3

    Go to config menu/Ports and Pins/Inputs, then E-Stop and change the active state.

Similar Threads

  1. To mach3 or not mach3, opinions requested
    By KenCameron in forum HURCO
    Replies: 13
    Last Post: 10-07-2014, 10:05 PM
  2. Differences Between Mach3 Mill and Mach3 Plasma?
    By cjjonesarmory in forum Mach Plasma / Laser
    Replies: 0
    Last Post: 11-18-2010, 04:12 PM
  3. Using Mach3 with Reprap extruderUsing Mach3 with Reprap extruder
    By router101 in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 3
    Last Post: 11-03-2010, 10:46 PM
  4. Mach3
    By butchw in forum Mach Mill
    Replies: 7
    Last Post: 02-29-2008, 03:50 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •