Hi there I am trying out madCAM but can't get a post to work with my ShopSabre. I have a winCNC post for RhinoCAM But it is not a .txt file. I attached the post file I have.
And here is what the start of my g code looks like from RhinoCAM

-----
N0000001G90
N0000002M8
N0000003M61
(inlays)
(First)
N0000004T1
N0000005 S10000
N0000006M3
N0000007 G0 Z1.500
N0000008 G0 X29.246 Y5.113
N0000009 G1 X29.246 Y5.113 Z-0.710 F340.
N0000010 G1 X33.685 Y5.113 Z-0.710 F300.
N0000011 G1 X35.415 Y7.976 Z-0.710
N0000012 G3 X35.313 Y8.156 I-0.102 J0.061
N0000013 G1 X30.239 Y8.155 Z-0.710
N0000014 G2 X29.759 Y8.432 I0.000 J0.554
N0000015 G1 X24.066 Y18.295 Z-0.710
N0000016 G2 X25.630 Y21.004 I1.564 J0.903

Any help Would be great!

Tom