[Janettx]

I'd love to purchase a dragon like this one to fit on a product I sell. I normally engrave this one with a laser machine but I'd like to use my CNC instead. It is an edit from a file I purchased. Anyone have something like this for sell or anyone interested in creating a 3D file for me? TIA

[biqut2]

Like this?
https://drive.google.com/file/d/0B_J...ew?usp=sharing
https://drive.google.com/file/d/0B_J...ew?usp=sharing

[Janettx]

Thank you, I will give this a try. I've tried to engrave this and the results were so shallow that it was not worth the time. I'll will try using this stl file.
Do you have a website where you sell your work? I'm always on the look out for 3D files to purchase.
Thank you very much for your time, I truly appreciate it.
Janet

[biqut2]

No I do not currently have a website. I work full time as a machinist and have four children. This leaves little time for much else. I was happy to help. I hope it works out for you. If you need assistance with modifications or posting gcode for your machine and tooling I can assist with that as time allows. Good luck machining it!

[Sean P]

Here are a couple of companies that could accommodate and assist you with the type of service that you are looking for:

Artifacturing > Artifacturing - Design and Manufacturing Consultant

PLA3D > http://www.pla3d.com/

Vectorclip3D > https://www.vectorclip3d.com/index.php