603,365 active members*
3,137 visitors online*
Register for free
Login

Thread: frenic 5000v2 wiring

Results 1 to 2 of 2
  1. 07-12-2007, 04:24 AM #1
    w5dsy
    w5dsy is offline Registered
    Join Date
    Jul 2007
    Posts
    1

    frenic 5000v2 wiring

    i am hopping someone can help i just got my spindle drive back from repair and i lost the paper i had my wiring on i figured out all but two little blue wires marked E spindle is out of shizuoka b5v any help would be appreciated
    Reply With Quote Reply With Quote
  2. 08-08-2007, 09:13 PM #2
    nakatome
    nakatome is offline Registered
    Join Date
    Aug 2007
    Posts
    31

    spindle drive

    hi, your blue wires if they did not pull out of a honda connector may be rpm/load meter connect to TB. nakatome
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Fuji frenic v5000 spindle drive problem
    By zoeper in forum CNC Machine Related Electronics
    Replies: 18
    Last Post: 08-04-2013, 08:32 AM
  2. Fuji Frenic 5000
    By hotrob1 in forum CNC Machine Related Electronics
    Replies: 5
    Last Post: 02-03-2010, 08:20 PM
  3. Fuji Frenic Spindle Drive....repair options
    By TR MFG in forum CNC Machine Related Electronics
    Replies: 3
    Last Post: 09-16-2008, 12:29 AM
  4. Fuji Frenic 5000 V2
    By shuggie in forum Servo Motors / Drives
    Replies: 1
    Last Post: 05-14-2008, 05:51 AM
  5. wiring it all together
    By russell in forum CNC Machine Related Electronics
    Replies: 2
    Last Post: 08-22-2006, 03:08 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules