[praest]

I have a problem with my CNC-mill.
The power has been turn off, for so long, that the battery was flat.
I have typed in the parameters, but now I can't use the LBL CALL.
I suspect that I don't have the correct parameters, the machine requred more than I had on my list.

[RMARCH]

I have a problem with my CNC-mill.
The power has been turn off, for so long, that the battery was flat.
I have typed in the parameters, but now I can't use the LBL CALL.
I suspect that I don't have the correct parameters, the machine requred more than I had on my list.

I have some parameter lists for different machine with the HH155 control.
What type of machine do you have ? I will also need and email address to send them too.

[gridley51]

You can download the Heidenhain 155 manuals from here.One of them will give you an explanation of the parameters.

http://filebase.heidenhain.de/doku/o...2C/N12D2C.html

Mark.

[praest]

If any one has another idea, why I can't use lbl call please don't hold back