603,942 active members*
4,226 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    May 2023
    Posts
    1

    My CNC router is buggy

    At each start, after a few minutes, the milling machine fails, the spindle always sends the cutters down to the end, crashes into the board to the end. What could be the problem? I use NC Studio as a control program. The strange thing is that at the very beginning it works as usual at the very beginning, and then it starts to fail and crashes into the board. Why?

    Can the settings here affect this problem?

  2. #2
    Join Date
    Apr 2004
    Posts
    5951

    Re: My CNC router is buggy

    Has it got servo motors? This sounds like what happens when a servo isn't connected to its encoder.
    Andrew Werby
    Website

Similar Threads

  1. New Profile features a little buggy
    By outlier in forum MadCAM
    Replies: 1
    Last Post: 05-27-2017, 02:18 PM
  2. Mach probing addon buggy?
    By Tristar500 in forum Mach Wizards, Macros, & Addons
    Replies: 2
    Last Post: 01-21-2010, 05:25 PM
  3. solidworks- buggy?
    By zooloader in forum Solidworks
    Replies: 7
    Last Post: 08-13-2007, 01:51 PM
  4. Limits and Rubber baby buggy bumpers
    By samualt in forum DIY CNC Router Table Machines
    Replies: 3
    Last Post: 03-03-2004, 11:34 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •